Optimus UMX-02/0 Operating Instructions Manual page 61

Personal: Activates
announcement. This must be recorded beforehand.
Use of the personalized pre-announcement is
incompatible with the use of queues and pre-
recorded messages on a card (RP1).
The √ sign indicates the current confi guration.
Situate the position indicators on the desired
5
option and press key
Press the MENU/OK key to save the data.
• VII. RP1 (only for the UMX-EGC card
inputs).
For inputs confi gured as priority, through this
option a message can be recorded in the memory
of the card for subsequent playback whenever
required (activating the priority contact of the
audio input).
This option is incompatible with the use of a
personalized pre-announcement or a message
queue.
Activation / Deactivation of the function
RP1:
Select the option RP1 and press MENU/OK.
Select Off (RP1 deactivated) or
activated) and press key
The √ sign indicates the current confi guration.
N.B.: Options RP1 and
Queues are mutually
exclusive. When
function RP1 is activated,
the Queues function
disabled.
Press MENU/OK to confi rm or CANCEL to reject
the change.
Confi guration of the RP1 message:
Select On and press MENU/OK. Three options
appear:
1. Record message:
Connect the audio source with a level of
0 dB to the input of the UMX-EGC card in
accordance with fi gure 9
1 Pin number 1: SIGNAL H
Pin number 2: SIGNAL C
Pin number 8: GND
8
Figure 20
UMX-02/0 v1.0
UMX-02/0
the personalized pre-
to select.
On (RP1
5
to confi rm.
W a r n i n g
the
T h e Q u e u e f u n c t i o n
w i l l b e d i s a b l e d
O K C A N C E L
is
Select Record Message and press MENU/
OK.
Press MENU/OK
again to begin
recording.
Press any key to end the recording.
2. Play message:
Select Play Message
and press MENU/
OK.
Position the monitor
indicated (using the CHANNEL SELECTOR
keys) and press the MENU/OK key.
3. Playback mode:
N.B.: In order to modify and save changes
made to the playback mode, the RP1
function must in the On position.
Select Playback
Mode and press
MENU/OK.
Situate the position indicators on Once
(the message will be played back only
once when the input priority is activated)
or Endless (the message will be played
back continuously while the input priority is
activated) and press key
Press MENU/OK to save the data.
• VIII. Queues (only for the UMX-EGC
card inputs).
For inputs confi gured as priority, the use of queues
avoids the loss of messages when the outputs to
which they are addressed are busy.
The system automatically records all the messages
in a temporary memory, and when the outputs are
free, the message is played back.
This option is incompatible with the use of a
personalized pre-announcement and messages
prerecorded on a card (RP1).
Select the option Queues and press MENU/OK.
Select Off (Queue deactivated) or
activated) and press key
The √ sign indicates the current confi guration.
Press the MENU/OK key to save the data.
ENGLISH
0 1 0 3 _ i 3 R P 1
R e c o r d M e s s a g e
P l a y M e s s a g e
P l a y b a c k M o d e
0 1 0 3 _ i 3 R P 1
R e c o r d M e s s a g e
P l a y M e s s a g e
P l a y b a c k M o d e
on the channel
0 1 0 3 _ i 3 R P 1
R e c o r d M e s s a g e
P l a y M e s s a g e
P l a y b a c k M o d e
5
.
On (Queue
5
to confi rm.
61
Eng