Front Panel Connectors - DFI LanParty X58-T3eH8 User Manual

2
Hardware Installation

Front Panel Connectors

HD-LED: Primary/Secondary IDE LED
This LED will light when the hard drive is being accessed.
RESET: Reset Switch
This switch allows you to reboot without having to power off the
system thus prolonging the life of the power supply or system.
SPEAKER: Speaker Connector
This connects to the speaker installed in the system chassis.
ATX-SW: ATX Power Switch
Depending on the setting in the BIOS setup, this switch is a "dual
function power button" that will allow your system to enter the Soft-
Off or Suspend mode.
PWR-LED: Power/Standby LED
When the system's power is on, this LED will light. When the system
is in the S1 (POS - Power On Suspend) or S3 (STR - Suspend To
RAM) state, it will blink every second.
56
Intel
1
1
ICH9R
1
RESET
SPEAKER HD-LED
1 9
2 0
PWR-LED
ATX-SW
1
2