DFI LanParty X58-T3eH8 User Manual page 30

2
Hardware Installation
6. Replace the heatsink
then use the mounting
screws (removed in step
2) to
heatsink and the Flame-
Freezer in place.
Installing Flame-Freezer at the External Rear Side of the Chassis
1. Before you proceed,
make sure you have
already installed the
provided I/O shield and
system board into the
chassis.
2. The heatsink base used
for mounting the Flame-
Freezer
behind the metal-plate-
covering.
30
secure the
is located
I/O shield
Metal-plate-covering