DFI LanParty X58-T3eH8 User Manual page 101

CPU VID Control
This field allows you to manually adjust to a higher core voltage that
is supplied to the CPU. If you want to use the CPU's default core
voltage, leave this field in its default setting. The CPU's Vcore will be
generated according to the CPU VID configuration.
Important:
Although this function is supported, we do not recommend
that you use a higher voltage because unstable current may
be supplied to the system board causing damage.
CPU VID Special Add Limit
The options are Enabled and Disabled.
CPU VID Special Add
The options are Auto, 100.23% to 114.88%.
Vcore Droop Control
This field is used to enable or disable the Vcore Droop control.
DRAM Bus Voltage
The options are 1.455V to
DRAM PWM Switch Frequency
The options are Nominal Frequency, Reduce 15%, Reduce 30%,
Increase 15% and Increase 30%.
DRAM PWM Phase Control
The options are 2 Phase Operation and 1 Phase Operation.
CPU VTT Special Add
The options are Auto, +0.0125V to +0.1875V.
CPU VTT Voltage
The options are 1.21V to
2.400V.
1.61V.
3
BIOS Setup
101