GE 20 Series Owner's Manual & Installation Instructions page 20

REVERSING THE DOOR SWING
INSTALL CENTER HINGE
9
BRACKET ON LEFT SIDE
Remove the screw hole cover from the left side and
insert it into the screw holes on the right side.
Insert the center hinge pin into the hinge hole on top
of the refrigerator door.
Attach the center hinge to the cabinet with screws.
Installation Instructions
20
(CONT.)
REHANG THE FREEZER DOOR
10
Lower the freezer door onto the center hinge pin.
Shut the door, making sure to align the door with
the cabinet.
Insert the top hinge pin into the hinge hole on top
of the freezer door. Attach the hinge to the top of the
cabinet loosely with the screws.
Make sure the gasket on the door is flush against the
cabinet and is not folded.
Support the door on the handle side and make sure
the door is straight and the gap between the doors
is even across the front. While holding the door in
place, tighten the top hinge screws. Replace the
hinge cover.