1
1
RECOIL STARTER AND ROTOR
IGNITION COIL AND ROTOR INSTALLA-
2
TION
cC
Be sure to remove any oil grease from the
tapered portion of the magneto rotor using
a cloth dampened with thinner.
1. Install:
NOTE:
When installing the rotor, make sure the
woodruff key is properly seated in the key way
of the crankshaft.
2. Install:
3. Inspection:
3-11
ENG
9 Woodruff key 1
9 Rotor
9 Rotor nut 2
27 Nm (2.7 m · kg, 19.4 ft · lb)
9 Ignition coil 1
6 Nm (0.6 m · kg, 4.3 ft · lb)
9 Air gap
inspect the clearance between the
magneto on the rotor and ignition coil.
Air gap:
0.5 ± 0.1 mm
(0.02 ± 0.004 in)
Out of specification → Replace.