Table of Contents
Advertisement
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or
others, or damage to the units or other property. These precautions include, but are not limited to,
the following:
Handling
• Treating the controller or driver roughly can damage the
internal circuit board, etc.
• Keep small parts out of the reach of infants. Your
children may accidentally swallow them.
• Do not place heavy objects on the units, and do not use
excessive force on the buttons, switches or connectors.
• Never touch the rotating pulleys. Doing so can result in
pinching your fingers, etc.
Assembly
• Assemble the units in the proper sequence by following
the assembly instructions in this manual. Also, make
sure to tighten the screws or bolts regularly. Failure to
do so might result in damage to the units or even injury.
• Use the bolts that comes with the vibraphone.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument.
Always turn the power off when the instrument is not in use.
4
YVD10 Owner's Manual
Transportation and Installation
• Do not place the units in an unstable position where it
might accidentally fall over.
• Before moving the instrument, remove all connected
cables, to prevent damage to the cables or injury to
anyone who might trip over them.
• When setting up the instrument, make sure that the AC
outlet you are using is easily accessible. If some trouble
or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even
when the power switch is turned off, electricity is still
flowing to the product at the minimum level. When you
are not using the units for a long time, make sure to
unplug the power cord from the wall AC outlet.
• When moving the instrument, move it gently avoiding
shocks and impacts. The instrument is sensitive to
shocks and may become damaged.
2/2
DMI-7
Advertisement
Table of Contents
