Periodic Inspections And Adjustments; Introduction; Maintenance Intervals Chart; Periodic Maintenance/Lubrication Intervals - Yamaha EF1000iS Service Manual

900 running watts/1000 starting watts, gas powered portable inverter, carb compliant
Hide thumbs Also See for EF1000iS:
Table of Contents

Advertisement

INTRODUCTION/MAINTENANCE INTERVALS CHART/

PERIODIC MAINTENANCE/LUBRICATION INTERVALS

PERIODIC INSPECTIONS AND ADJUSTMENTS

INTRODUCTION

This chapter includes all information necessary to perform recommended inspections and adjust-
ments. These preventive maintenance procedures, if followed, will ensure more reliable machine
operation and a longer service life. The need for costly overhaul work will be greatly reduced. This
information applies to machines already in service as well as new machines that are being prepared
for sale. All service technicians should be familiar with this entire chapter.

MAINTENANCE INTERVALS CHART

Proper periodic maintenance is important. Especially important are the maintenance services relat-
ed to emissions control. These controls not only function to ensure cleaner air but are also vital to
proper engine operation and maximum performance. In the following maintenance tables, the ser-
vices related to emissions control are indicated as "*" in the chart.
PERIODIC MAINTENANCE/LUBRICATION INTERVALS
No.
Item
Check condition.
*
1.
Spark Plug
Adjust gap and clean. Replace if necessary.
*
Check and adjust
2.
Valve Clearance
when engine is cold.
*
Check breather hose for cracks or damage.
Crankcase
3.
Replace if necessary.
breather system
*
4.
Idle speed
Check and adjust engine idle speed.
Check for leakage.
Retighten or replace gasket if necessary.
*
5.
Exhaust System
Check muffler screen and spark arrester. Clean/
replace if necessary.
Check oil level
6.
Engine Oil
Replace
Clean.
*
7.
Air Filter
Replace ifnecessary.
Clean fuel tank filter.
8.
Fuel Filter
Replace if necessary.
Check fuel hose for crack or damage.
9.
Fuel Line
Replace if necessary.
10. *
Choke knob
Check choke operation.
11. Cooling System
Check for fan damage.
12. Starting System
Check recoil starter operation.
*
: Related to emission control system.
Remarks
2-1
INSP
ADJ
Initial
Pre-Ope-
ration
1
3
check
month
months
(daily)
or 20 Hr
or 50 Hr
or 100 Hr
0
0
0
0
0
0
0
0
Every
6
12
months
months
or 300 Hr
0
0
0
0
0
0
0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents