During A Call; Using Call Waiting; Accepting A Waiting Call (Camp-On) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Call waiting?
Program/Service
Quit and return?
Program/Service

During a Call

Using Call Waiting

Callers can still reach you while you are engaged in an-
other call. A signal alerts you to the waiting call.
You can either ignore or accept the waiting call.
When you accept the waiting call, you can either end
the first call or place it on hold and resume the call later
on.
You can also bar call waiting or the call waiting tone
Page 50.

Accepting a Waiting Call (Camp-On)

Precondition: You are engaged in a phone call and hear
a tone (every six seconds).
Ending the first call and answering the waiting call:
t
Replace the handset. Your telephone rings.
n
Answer the second call. Lift the handset.
Placing the first call on hold and answering the sec-
ond call:
Select and confirm.
or
Press the key. The LED lights up. Enter the code.
qii
You are connected to the call waiting party immediately.
The first party is placed on hold.
Ending the second call and resuming the first one:
Confirm.
or
qd
Press the key. The LED lights up. Enter the code.
or
t n
Replace the handset. "Recall: ..." appears on the screen.
Lift the handset.
Making Calls – Convenience Functions
49