Before Operation; Selecting The Language; Using The Stop Button - Sharp R-941(BK)W Operation Manual With Cookbook

Your oven has an energy save mode.
1. Plug in the oven. Nothing will appear on the
display at this time.
2. Open the door. The oven lamp will light while the
door is open.
The oven display will show "SELECT LANGUAGE"
in 5 languages.
NOTE: Once you select the language using the
LANGUAGE button, the display will show ". 0".
3. Close the door.
The oven display will show ". 0".
4. Select a language (See below).
NOTE: If you use the oven in English, you do not
have to select language, and go to step 5.
5. Heat the oven without food (See page GB-12).
In Energy Save Mode, if you do not operate the oven for 3 minutes or more (e.g. closing the door, pressing the
STOP button, or at the end of cooking), you will not be able to operate the oven until you open and close the
oven door.
Press LANGUAGE button
once
twice
3 times
4 times
5 times
Example:
Suppose you want to select German:
1. Choose the desired language by
pressing the LANGUAGE button.
x2
NOTE: The selected language will be memorised even if the electical power supply is interrupted.
COOKING HINTS:
The oven has an 'Information Display System' which
offers you step by step instructions to easily guide
you through each feature, and enable you to gain
information in your desired language. The oven has an
INFO button for getting instructions for each button.
Indicators will appear in the display, after pressing a
button, to inform you of the next operation step.

SELECTING THE LANGUAGE

The oven comes set for English. You can change the
LANGUAGE
language. To change, press the LANGUAGE button
ENGLISH
until the desired language is displayed. Then press the
DEUTSCH
NEDERLANDS
FRANÇAIS
ESPAÑOL
2. Press the (START)/+1min button
to start the setting.

USING THE STOP BUTTON

Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press the
GB-9

BEFORE OPERATION

(START)/+1min button.
Check the display.
x1
STOP button twice.