Checkweighing - KERN FXN-N 3K -3 Operating Instructions Manual

9.5 Checkweighing

In checkweighing an upper and a lower limit value can be established to ensure that
the weighed goods are exactly within the established tolerance limits.
 Start balance by
 Press
and at the same time in weighing mode.
 01 FnC appears
 Confirm with
button
 FnC 00 appears
 Use the
button to change between the numeric values.
 Increase the number with
button.
 Decrease the number with
button.
 Now enter FnC 03
 Confirm by
button
 00000h appears flashing, enter upper limit value and confirm with
 00000L appears, enter lower limit value and confirm with
 01100b appears; here the acoustic signal is set (see tables below)
 Enter required adjustment and confirm with
 Switch balance off and again on and weigh the material.
FXN-N-BA-e-1511 21