B.3.31. AT&V
S0:m0;S1:m1; ...Sn:mn
Response
OK
Purpose
Display all the S-registers
Description
All parameters are stored at S-register in flash memory. These values are sustained until a
hardware reset.
Reference
ATS
B.3.32. ATSnn?
value
Response
OK
Purpose
Display a given S-register
Parameters
nn= Address of S-register
Description
A specific S-register will be displayed.
Reference
AT&V
B.3.33. ATSnn=mm
OK
Response
Purpose
Change S-register value
Parameters
nn= Address of S-register
mm= New value of S-register
Description
Some S-registers are optimized for the overall performance and protected and cannot be
changed. When users try to change these S-registers, response is ' ERROR' .
For details of S-register, refer Appendix. B.
Reference
AT&V
Example
ATS10=0
B.4. Command Validity
AT Command
AT
ATZ
AT&F
AT+BINQ?
ATD112233445566
Operation Status
Standby
○
○
○
◎
◎
39
Pending
Connect
○
○
○