Troubleshooting - Casio QV-7000SX Owner's Manual

Saving an HTML File
• When transferring CompactFlash card contents to a hard
disk, floppy diskette, MO disk, or other external storage,
keep everything in the QVIMG01 folder together. Changing
the name of the QVIMG01 folder to a date is a good way to
keep track of your images. However, note that you should
never delete or modify the QVS file in any way.
• Before using the CompactFlash card again (after storing its
images on other media), delete all its current files or refor-
mat the card.
Symptom Probable Cause
Auto Focus cannot focus 1. Lens or distance sensor is dirty.
the image. 2. The object you want to focus is not in the focus
frame.
3. Conditions make it impossible to obtain proper
focus.
Power failure during self- Low battery power
timer operation
Monitor screen image is out 1. Failure to focus the image while the camera is in
of focus. the Manual Mode.
2. Camera is in the Macro Mode.
3. Camera is in the Normal Mode while the subject
is too close.
Poor color and brightness Indoor fluorescent lighting
when indoors
Part of the image is miss- Blocking of the lens when recording.
ing.
Cannot perform movie re- 1. Movie Record Mode is not selected.
cording. 2. Insufficient camera memory capacity.
USING CompactFlash CARDS WITH YOUR COMPUTER

TROUBLESHOOTING

Action
1. Clean off the lens or distance sensor.
2. Aim the camera so the object you want to focus
is in inside the focus frame.
3. Switch to the Manual Mode and focus manually.
Replace all four batteries with a set of new ones
(page 27).
1. Focus the image before recording it.
2. Use the Normal Mode for scenery and group
shots.
3. Use the Macro Mode for close ups.
Shoot under incandescent or other non-fluorescent
lighting (page 39).
Hold the camera correctly, making sure that your
finger or the wrist strap is not blocking the lens.
1. Select the Movie Record Mode (page 50).
2. Delete images you no longer need from camera
memory, so there are at least two (SUPER
FINE) images worth of free memory capacity.
TROUBLESHOOTING
Symptom
No power 1. Batteries not loaded correctly.
2. Dead batteries
3. Wrong AC adaptor
Sudden power failure 1. Auto Power Off
2. Low battery power
3. Use of manganese batteries.
indicator on LCD Batteries are about to go dead.
No recording when shutter 1. Function Switch set to PLAY.
button is pressed 2. Flash unit is charging.
3. The message "MEMORY FULL" is on the moni-
4. The message "REMAINING" is on the monitor
5. Insufficient memory card capacity or no memory
117 118
TROUBLESHOOTING
Symptom
Color of recorded image is Reflection from sunlight or light from another
strange. source
No +/– button operation Button operation during page change
during multi-page display
Some images are missing. No images in selected folder
Cannot use multi-page dis- No images in selected folder
play.
Camera is connected to a 1. Incorrect camera-TV connection
TV, but LCD monitor con-
tents do not appear on TV 2. Wrong TV set up
screen. 3. Wrong video mode is selected.
Images cannot be displayed The images were on a memory card when they
when downloaded back the were opened on the computer for editing and then
camera from a computer. resaved back to the memory card.
Delete operation does not All pages are protected.
operate.
Menu icon is blue and noth- •
ing happens when it is se-
lected. •
119 120
Probable Cause
1. Correctly load batteries (page 27).
2. Replace all four batteries with a set of new ones
(page 27).
3. Use only recommended AC adaptor .
1. Turn power back on.
2. Replace all four batteries with a set of new ones
(page 27).
3. Replace manganese batteries with alkaline,
lithium or Ni-MH batteries.
Replace all four batteries with a set of new ones
(page 27).
1. Set Function Switch to REC.
2. Wait until flash unit charging is finished.
3. Delete images you no longer need from camera
memory.
tor screen.
4. Change to another resolution mode, or delete
images you no longer need from camera
screen.
memory.
5. Load a memory card.
card loaded in camera.
Probable Cause
Reorient the camera so that light is not shining di-
rectly into lens.
Wait until an image is on the monitor screen before
performing a button operation.
Check other folders for images.
Check other folders for images.
1. Connect correctly using the video cable (page
98).
2. Set up the TV correctly.
3. Change the video mode.
Use the QV-LINK application to download edited
images back to the camera.
Unprotect the page you want to delete (page 88).
Certain functions are disabled in some modes. A Select a different function or change to the Record
disabled function is indicated by a blue icon. Mode.
No image
Action
Action