Using Zoom; Displaying Multiple Images; Auto Play - Casio QV-7000SX Owner's Manual

7.
Use [+] and [–] to select
GROUPING, and then
press the shutter button.
8.
Use [+] and [–] to scroll through the other im-
ages that make up the panorama until the one
you want to use as the final image is on the dis-
play.
9.
Press the shutter button to re-group the pan-
orama images.
• The panorama playback screen (page 71) appears af-
ter the re-grouping operation is complete.
Enlarged Image Movement
• Pressing [–] slides the image in the opposite direction.
NOTE
Zooming an image while image information is turned on
(page 21), an image part indicator appears in the
upper right corner to indicate which part of the image is
currently on the screen. Display of the image part indi-
cator can be toggled on and off by pressing DISP.
PLAYBACK
To ungroup panorama images
1.
Perform steps 1 through 6 under "To re-group
panorama images" on page 72.
2.
Use [+] and [–] to select
C A N C E L G R O U P I N G ,
and then press the shut-
ter button.
3.
Use [+] and [–] to select the panorama you
want to ungroup, and then press the shutter
button.
• The above step ungroups the panorama images and
displays the next panorama in the current folder. You
can repeat step 3 to ungroup more panoramas, or you
can press MENU to terminate the procedure.
• The above procedure is terminated automatically if
there are no more panoramas in the current folder.
PLAYBACK

Displaying Multiple Images

The following operation lets you simultaneously view four
images on the same screen. This capability is especially
useful when playing back to the screen of a connected TV,
and can be used to display a catalog of products, etc.
1.
Slide the Function Switch to PLAY.
2.
Press MENU.
PLAYBACK

Using Zoom

The following operation lets you magnify an image to twice
its normal size. Note that you can zoom only a single still
image.
IMPORTANT!
Movie and panorama images cannot be zoomed.
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to select the image you want to
zoom in.
3.
Press MENU.
73 74
PLAYBACK
3.
Use [+] and [–] to select
VIEW, and then press the
shutter button.
4.
Use [+] and [–] to select 4PAGE, and then press
the shutter button.
• The first image of the set is the image that was on the
screen when you performed step 2 of this operation.
The other images are those that sequentially follow
the first one.
5.
Use [+] and [–] to scroll through images stored
in memory.
6.
After you are finished, press any button be-
sides [+], [–], or DISP return to the normal
single-image display.
75 76
4.
Use [+] and [–] to select
VIEW, and then press the
shutter button.
5.
Use [+] and [–] to select ZOOM, and then press
the shutter button.
• This magnifies the center part of the image to twice its
normal size.
6.
Use [+] and [–] to slide the image so you can
view the part of it that you want.
7.
After you are finished, press any button be-
sides [+], [–], or DISP return the image to its
normal size.

Auto Play

Auto Play automatically scrolls through the images stored in
memory. You can also specify how much time should be al-
lowed between each image.
IMPORTANT!
Auto Power Off (page 30) is disabled whenever Auto
Play is being used. This means you should not leave
Auto Play running when using batteries to power the
camera. Doing so can rundown batteries. Be sure to
stop Auto Play and turn off the camera after you are
finished.