Playback; Basic Playback Operation; Playing Back A Movie - Casio QV-7000SX Owner's Manual

5.
Repeat step 4 for other items, if you want.
6.
After the on/off status of each item is the way
you want it, press MENU.

PLAYBACK

The following describes the different techniques that you can
use to playback recorded images.

Basic Playback Operation

The built-in monitor screen of the camera lets you play back
recorded images without connecting an external monitor.
1.
Slide the Function Switch
to PLAY.
REC PLAY
• The PLAY position selects the Playback Mode, while
REC selects the Record Mode.
2.
Use [+] and [–] to scroll through the images
stored in camera memory.
• Press [+] to scroll forward and [–] to scroll back. Hold-
ing down either button scrolls at high speed.
OTHER RECORDING FUNCTIONS
Initializing Mode Memory
Use the following procedure to initialize the mode memory.
To initialize mode memory
1.
Slide the Function Switch to REC.
2.
Align the dial with .
3.
Use [+] and [–] to select MODE MEMORY, and
then press DISP to initialize mode memory.
• The following table shows the mode memory status of
each item following the above procedure.
PLAYBACK
NOTES
• Sliding the Function Switch to PLAY immediately after
recording an image displays the image you just re-
corded first.
• Pressing the shutter button while a movie or pan-
orama image is on the monitor screen starts playback
of the movie or panorama .
• The image that initially appears on the monitor screen
in the PLAY mode is a preview image. The full of im-
age appears after a few seconds.
OTHER RECORDING FUNCTIONS
Item Initialized Setting
WB
APERTURE
DIGITAL ZOOM
FLASH
AF/MF/MACRO
METERING
• An item that is ON stores its current setting in mode
memory when camera power is turned off, and restores the
setting when power is turned back on again.
• An item that is OFF uses the camera's preset power on
default setting.
65 66
PLAYBACK

Playing Back a Movie

Use the following operation to play back a movie that was
recorded using the operation under "Movie Recording" on
page 50.
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to select
the movie you want to
play back.
3.
Press the shutter button to start playing back
the movie.
• You can use [+] (forward) and [–] (reverse) while play-
ing back a movie to change the playback direction.
• To enlarge the movie image so it fills the entire moni-
tor screen, press DISP. Pressing the DISP again re-
turns the image to its original small size.
• Pressing the shutter button during movie play pauses
playback. Press the shutter button again to resume
playback.
67 68
OFF
OFF
OFF
ON
OFF
ON
• While movie playback is paused, you can use [+] (for-
ward) and [–] (reverse) to move frame-by-frame
through the movie.
4.
After the movie is complete, press MENU.