Hyundai AIR 953 Instruction Manual page 44

B2. TEMPERATURE ADJUSTMENT BUTTON
Press the button
adjustable between 16 to 31 . At cool mode when the unit is on, press button
check the set temperature. The set temperature will be displayed for 10 seconds then automati-
cally revert back to display actual room ambient temperature conditions.
Note: the set operating temperature must be programmed within the 10 seconds of set tempe-
rature displaying. Every press of button
every press of button
At fan mode, both button
B3. OPERATION MODE BUTTON MODE
Use to select the operation mode in the order of:
COOL DRY
B4. TIMER SET BUTTON
1) When the unit is on, press the button
displayed for 10 seconds. If no AUTO-OFF time is set, " 0 " will be shown on the display and
you can press the button to activate the AUTO-OFF timer function. Before 10 hours, every
press of button
button increases the AUTO-OFF time by 1 hour. You can refer to the following:
0.5 1 1.5
Notice: After 10 seconds of AUTO-OFF timer being set, room actual temperature will resume
to be displayed.
2) When the unit is off, press the button
played for 10 seconds. If no AUTO-ON time is set, " 0 " will be shown on the display and
you can press the button
press of button
button increases the AUTO-ON time by 1 hour. You can refer to the following:
0.5 1 1.5
3) To cancel AUTO-ON/OFF timer operation, press button
for 10 seconds in the LED window on the operation panel, then automatically reverts back to
display actual room temperature.
B5. FAN SPEED BUTTON
Press the button to set the fan speed in the order of:
low medium
At DRY and SLEEP mode, fan speed button is not functional.
B6. SwING ADJUSTMENT BUTTON
Press this button to select the left/right swinging of air delivery or to stop swinging.
or to select a suitable operating temperature. Temperature settings are
decreases the set operating temperature by 1°C.
or are not functional.
FAN
(TIMER RANGE: 0.5-24 hOURS)
increases the AUTO-OFF time by 0.5 hour, after 10 hours, every press of
 2.5 
to activate the AUTO-ON timer function. Before 10 hours, every
increases the AUTO-ON time by 0.5 hour, after 10 hours, every press of
 2.5 
high low
increases the set operating temperature by 1°C ,
COOL ...
once to check the AUTO-OFF time that will be
3.5 ... 9.5 10
once to check the AUTO-ON time that will be dis-
3.5 ... 9.5 10
...
ENG - 44
or
11... 24 0 0.5...
11... 24 0 0.5...
continuously until "0.0 " appears
once to