Table of Contents
Advertisement
Available languages
Available languages
REMOTE CONTROLLER
D1
OPERATION DISPLAY - It displays the current settings.
D2
TEMPERATURE ADJUSTMENT buttons - At cool mode, every press of button
increases the setting temperature by 1 ; Every press button of
temperature by1 ; the range of setting temperature is 16 -31 .
D3
ON/OFF button - Turns unit ON/OFF.
D4
OPERATION MODE button - Press it to select operation mode:
AUTO
COOL
D5
SLEEP button - Press it to start sleep running and press again to stop it.
D6
SIGNAL EJECTING WINDOW - It sends signals to the unit.
D7
FAN SPEED button - Press it to change the fan speed in the order of auto
medium
high
D8
SWING button - Press the button to select the left/right swinging of air delivery or to
stop swinging.
D9
MANUAL SWING button - Press it to change left/right air flow direction and the deflector
moves at a certain angle. You can change the moving angle in the order of:
D10
TIMER ON/OFF button - Used to initiate or stop AUTO-ON/OFF timer operation.
Notice:
1)
To operate, the remote should be within 6 meters of the unit with a clear line of sight.
2)
Remove the batteries if the remote controller is not to be used for long periods of time.
AUTO-OFF TIMER OPERATION
1)
Press button TIMER when the air conditioner is on to initiate the AUTO-OFF TIMER functi-
on. Meanwhile,
2)
Before 10 hours, every press of button
time by 0.5 hour; after 10 hours, every press of button
AUTO-OFF time by 1 hour. You can refer to the following:
0.5
1
1.5
3)
The unit will now " stop " automatically at the specified AUTO-OFF time when you see
of
not flash on the display. Meanwhile, the set temperature will revert back to be
displayed. To view AUTO-OFF time, press button TIMER.
DRY
auto
....
of
starts to flash on the display.
2.5
3.5 ... 9.5
ENG - 45
FAN
AUTO
or
increases or decreases the AUTO-OFF
or
10
11... 24
decreases the setting
...
low
increases or decreases the
0
0.5...
ENG
Advertisement
Table of Contents
