Control Panel - Haier HDY6-1 Service Manual

Control panel

A - Program knob
Turn this knob to choose the drying program you desired. This type of
dryer has 15 program options available for you to choose. For description
of specific programs, refer to the list of programs on Page 10. At the same
time, this knob also serves as a power switch. When it is turned to "OFF,"
the power supply turns off; when the drying program is selected, the power
supply turns on.
B - Start/Pause button
After turning on the power, select the drying program you desired.
Gently touch this button to start the dryer. Gently touch this button again
during the operation of the dryer and the indicator light and display screen
will flash digits and the machine will be halted. Press the button again and
the program will continue to operate.
C - Delicate button
After this function is selected, the corresponding indictor light will be
on and the low power heater will operate. During the operation of a program,
the drying temperature will decrease so as to have a better care of the
delicate laundry.
D - Delay button
Gently touch this button before a program starts. You may choose to
start the dryer after a preset time. The delay range is between 1 and 24
hours. Every touch of the delay button will make an increment of one hour.
When in excess of 12 hours, the remaining time will be redisplayed. After
a delay time is set, gently touch the Start/Pause button to the start the
delay operation and the indicator light will flash.
Condenser Tumber Dryer HDY6-1
l
-10-