Net Dimention - Haier HDY6-1 Service Manual

E - Condensate collection box handle
The condensate collection box is used to store the condensate during
the drying. When the program is complete, empty the condensate
collection box timely.
F - LED screen
The screen displays the remaining time for a program, the delay time
and other related information.
Note: The remaining time to start a program is the default time for the
program. During the operation, with the variation of the factors such as
the moisture content the actual remaining time program will be automatically
adjusted until the preset drying result has been achieved and the program
is complete.
G - Indicator light for cleaning up the condensate collection box
When this light is on, it indicates that the condensate collection box is
full of condensate. Please empty the box. At this time the operation of
the program will be halted. After the box is emptied, press the Start/Pause
button and the program will continue to operate.
H - Indicator light for cleaning the filter screen
When this light is on, it indicates that the program has operated in the
cold air cycle and will be complete soon. It prompts the user to clean the
filter screen after the program is complete.
C D composite button and children lock function
During the operation of a program, you may press and hold down both
buttons for 10 seconds to set up the children lock function if necessary.
At this time, the display screen shows the remaining time and the lock
alternatively, and the control panel will be locked. Press and hold down
both buttons for 10 seconds once again and the children lock will release.
Condenser Tumber Dryer HDY6-1
-11-