Programming/Erasing The Remote Controller Code Yourself - Suzuki Grand Vitara 2007 Owner's Manual

Hide thumbs Also See for Grand Vitara 2007:
Table of Contents

Advertisement

Door Locks: 3, 5, 8
(1)
2) Replace the battery (1) (Lithium disc
type CR2032 or equivalent) so its + ter-
minal faces the bottom of the case as
shown in the illustration.
3) Close the remote controller firmly.
4) Make sure the door locks can be oper-
ated with the remote controller.
5) Dispose of the used battery properly
according to applicable rules or regula-
tions. Do not dispose of lithium batter-
ies with ordinary household trash.
WARNING
Swallowing a lithium battery may
cause serious internal injury. Do not
allow anyone to swallow a lithium
battery. Keep lithium batteries away
from children and pets. If swallowed,
contact a physician immediately.
CAUTION
The transmitter/remote controller is a
sensitive electronic instrument. To
avoid damaging it, do not expose it to
dust or moisture or tamper with inter-
nal parts.
66J017
BEFORE DRIVING
Programming/erasing the remote con-
troller code yourself
Your new vehicle was originally equipped
with two remote controllers.
If you have lost one of the remote control-
lers, you should change the remote con-
troller code in your vehicle's memory as
soon as possible for security. If you pur-
chase additional remote controllers, the
new remote controllers need to be pro-
grammed into your vehicle's memory. You
can perform this yourself by using the fol-
lowing procedure:
NOTE:
• You can program up to four remote con-
troller codes into your vehicle's memory.
The four codes may be the same or dif-
ferent.
• If you try to program a fifth code, the four
remote controller codes that are pro-
grammed will be cleared automatically.
• If you program a new remote controller
code, all of the old remote controller
codes that are in your vehicle's memory
will be erased automatically. When you
program a new remote controller, you
should reprogram any additional remote
controllers at the same time.
• To purchase new remote controllers, see
your SUZUKI dealer.
• Before you begin programming, have all
of your remote controllers available.
66J21-03E
2-8

Advertisement

Table of Contents
loading

This manual is also suitable for:

2007

Table of Contents