Wide Area Network Setup - Bunker Hill Security 61229 Owner's Manual & Safety Instructions

8-channel surveillance dvr
Hide thumbs Also See for 61229:
Table of Contents

Advertisement

Wide area network (Wan) Setup
Read the EntiRE imPORtant SaFEtY inFORmatiOn section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
this setup allows you to connect to the DVR from a remote computer or smartphone.
this is an advanced setup. You may need to consult your Router's manual and/or call the
manufacturer or internet Service Provider for instructions on Port Forwarding.
1. Set up local area network first.
2. Open Internet Explorer ® and type the
Default Gateway (Router's iP address)
in the address bar and press Enter. This
will bring up your Router's Log in.
3. Login to your Router and check
your connection type.
a. If Static, the IP Address will not change
and your connection will remain stable.
Proceed to Port Forwarding.
b. If DhCP, the IP Address will change at
some point in time. When it changes you
will then need to use the new IP Address to
connect to the DVR. Other options are:
• Contact your ISP and request a Static IP
Address, for which there may be a charge.
• Set up a Dynamic Domain Naming
System. This is outside the scope of
this manual. Settings can be accessed
on the network > DDnS tab.
Page 30
For technical questions, please call 1-800-444-3353.
4. Go to Port Forwarding or
applications and Gaming.
5. Set start port to 3000 and end port to 3002. Set up
both UDP and TCP protocols if the option is given.
6. Open Internet Explorer ® and type in the
Router's iP address and httP Port:
a. http://xx.xxx.xxx.xxx:yyyy
where x = iP address and y = httP Port.
This is the DVR's Public iP address, write it
below:
_________________________________
b. Press Enter.
c. Allow ActiveX control to install.
note: You my need to adjust the settings in
Internet Explorer ® by adding the http address to
Trusted Sites and modifying ActiveX controls.
7. After ActiveX Control installs, Log in to
DVR using User Name and Password.
8. The DVR can now be controlled by a
remote computer or smartphone.
Item 61229

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents