Main Settings - Bunker Hill Security 61229 Owner's Manual & Safety Instructions

8-channel surveillance dvr
Hide thumbs Also See for 61229:
Table of Contents

Advertisement

Set Date and Time

main Settings

System > General
Set Date and Time, Daylight Saving Time, Network
Time Protocol, Language, and Video Format
Figure k
1. Date: Set current date.
2. System time: Set current time.
3. Date Format: Select date format.
4. time Format: Select time format.
5. DSt Setup: Click to open setup window.
Figure l
6. Daylight Saving time: Select Enable or Disable.
a. time Offset: Select 1Hour or 2Hour.
b. Daylight Saving time mode:
• Week: Set month, week, day of week
and time for change to occur.
• Date: Set date and time for change to occur.
Item 61229
For technical questions, please call 1-800-444-3353.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
7. ntP (network time Protocol) Setup:
Click to open set up window.
note: This feature sets the internal clock from an
Internet server. The DVR must be connected to
the Internet for this feature to work. (See local
area network (lan) Setup on page 28.)
Figure m
a. Server address: Select server.
b. time Zone: Select time zone.
c. Click update now.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
8. language: Select preferred language.
9. Video Format: Default is ntSC, which is the
standard in the United States. Leave it set to ntSC.
10. menu time Out: Select how long menu will display.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
2
Page 17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents