Bunker Hill Security 61229 Owner's Manual & Safety Instructions page 10

Local Area Network (LAN) Setup
Do you have a
Windows® PC with
Internet Explorer®
and a Router?
Ensure you have a
Windows® PC with
Internet Explorer®
and a Router before
Create New IP
Address:
Are last 3 digits of
Default Gateway
between 0-99?
Click Apply then OK
to save changes.
Click Exit, DVR will prompt
restart. Click OK.
@
Page 10
In DVR
Main Menu
Select System
YES
NO
STOP
proceeding.
From DVR Main Menu
select
Network > Network
Type = Static
NO
Change last 3 digits
to a number between
200 and 255
Change last 3 digits
to a number between
YES 100 and 255
After restart,
on DVR go to
Network > Network
to view settings.
Allow ActiveX Control to install.
You may need to adjust the settings in
Internet Explorer® by adding the http
address to Trusted Sites and modifying
ActiveX controls to allow installation.
For technical questions, please call 1-800-444-3353.
Select
Set User Name
Users
and Password
Connect DVR to
Router via
Ethernet Cable
(Sold Separately)
On PC, go to Start
Menu, click Run.
In DOS window
type "cmd", click OK.
type "ipconfig"
press ENTER
In DVR Network > Network
1. Client Port: 3000
2. HTTP Port: 3001
3. New IP Address
4. Subnet Mask you wrote down
5. Default Gateway you wrote down
6. DNS1 same as Gateway
Open Internet Explorer®.
In address bar, type in
DVR's IP Address and HTTP Port:
http://xxx.xxx.xxx.xxx:3001
(where x = IP Address and 3001 = HTTP Port)
After ActiveX Control installs,
Log in to DVR
with User Name and Password.
See Page 28
Click Apply
then OK
Ethernet
Connection
Find the Router's LAN
Write down:
1. Subnet Mask
2. Default Gateway
(Router's IP Address)
change settings:
Press Enter.
Item 61229