Advertisement
Quick Links
INITIAL SETUP
Physical Connections
See Manual - Page 12
A
B
Connect
Connect
Cameras
Monitor
D1
B1
B3
B
B2
B1
B2
B1
B2
B1
B2
Set Date and Time
See Manual - Page 17
In DVR
Select
Main Menu
General
Select System
Set Recording Mode
See Manual - Page 18
Set Date and
Time above
Which
Recording
Manual
mode?
In DVR
Main Menu
Scheduled
select Record
Select boxes
for Normal and
Motion
Motion Detection Settings
See Manual - Page 19
Set Date and
Set Recording
Time above
Mode above
In DVR
Main Menu
Select Alarm
Select Area
Set Buzzer for
audible alarm
WARNING
This Quick Start Guide is not intended to
replace the Owner's Manual & Safety
Instructions. To prevent serious injury, read
all safety warnings and instructions therein
to ensure proper usage.
C
D
E
Connect
Connect
Mouse
Power
A
Video Output
BNC/RCA
VGA
Video Input
USB Port
C
B4
D
B5
Note: Monitor and
Surge Protector
sold separately.
Click Apply
Set Date and
Time
then OK
Press REC on
front of DVR -
red light will
flash
Select Channel
Select
and Day of
Schedule
Week
Repeat for all
Click Apply
Days and all
then OK
Channels
Select
Select
Motion
Channel
Select which
Set Sensitivity
Channels
Level
will record
Click Apply
then OK
1
8-Channel
Surveillance DVR
with 4 Cameras & Mobile Monitoring Capabilities
Mount
Local Area Network (LAN) Setup
Cameras
See Manual - Page 28
Windows® PC with
Internet Explorer®
Ensure you have a
Windows® PC with
Internet Explorer®
Power Input
and a Router before
D2
D5
D3
Create New IP
Are last 3 digits of
Default Gateway
D4
between 0-99?
Click Apply then OK
to save changes.
Click Exit, DVR will prompt
2
restart. Click OK.
@
3
Wide Area Network (WAN) Setup
FOR ADVANCED USERS
Internet Setup for Remote Use
See Manual - Page 30
PORT FORWARDING
@
4
REMOTE
COMPUTER
ACCESS
SMARTPHONE
ACCESS
In DVR
Select
Set User Name
Main Menu
Users
and Password
Select System
Do you have a
Connect DVR to
YES
Router via
Ethernet Cable
and a Router?
(Sold Separately)
NO
STOP
proceeding.
On PC, go to Start
From DVR Main Menu
Menu, click Run.
select
In DOS window
Network > Network
type "cmd", click OK.
Type = Static
type "ipconfig"
press ENTER
NO
Change last 3 digits
to a number between
200 and 255
1. Client Port: 3000
Address:
2. HTTP Port: 3001
3. New IP Address
4. Subnet Mask you wrote down
5. Default Gateway you wrote down
Change last 3 digits
6. DNS1 same as Gateway
to a number between
YES
100 and 255
After restart,
on DVR go to
DVR's IP Address and HTTP Port:
Network > Network
to view settings.
(where x = IP Address and 3001 = HTTP Port)
Allow ActiveX Control to install.
After ActiveX Control installs,
You may need to adjust the settings in
Internet Explorer® by adding the http
with User Name and Password.
address to Trusted Sites and modifying
ActiveX controls to allow installation.
Set up LAN
according to
instructions above.
Open Internet Explorer®.
Log in to the Router
In address bar, type in
and go to
Default Gateway
Port Forwarding or
(from LAN Setup above).
Applications and
Example: xxx.xxx.xxx.xxx
Gaming.
Press Enter.
Set start port to 3000
Find theRouter's IP
and end port to 3002.
Address by going to
Set up both UDP and
whatsmyip.com.
TCP protocols if the
Write it down.
option is given.
On remote computer,
Open Internet Explorer®. In address bar,
type in Router's IP Address
and HTTP Port (from LAN Setup above):
http://xx.xxx.xxx.xxx:3001
(where x = IP Address and 3001 = HTTP Port)
Press Enter.
After ActiveX Control installs,
Log in to DVR
with User Name and Password
(from LAN Setup above).
In DVR
Main Menu
Set User Name
Select Network
and Password
then Mobile
Insert supplied CD
into computer and look in
Mobile Software
folder for instructions.
Bunker Hill Security
®
Quick Start Guide
Item 61 229
Click Apply
then OK
Ethernet
Connection
Find the Router's LAN
Write down:
1. Subnet Mask
2. Default Gateway
(Router's IP Address)
In DVR Network > Network
change settings:
Open Internet Explorer®.
In address bar, type in
http://xxx.xxx.xxx.xxx:3001
Press Enter.
Log in to DVR
Allow ActiveX Control to install.
You may need to adjust the settings
in Internet Explorer® by adding the
http address to Trusted Sites and
modifying ActiveX controls to allow
installation.
Set Mobile Port
Click Apply
to 3002
then OK
Advertisement
