Users - Bunker Hill Security 61229 Owner's Manual & Safety Instructions

users

System > users
The system supports one administrator and
six users. The administrator has permission
to perform all activities and is authorized to
set up permissions for all other users.
Figure P
Set up administrator
1. Select admin and click Edit.
2. user name: Set User Name (up to 8 characters).
3. Password Enable: Select Enable or Disable.
note: When Password is Enabled, a key
icon will appear on Pop-Up Menu. Click
on key to enable Menu Lock.
a. Password: Enter Password
(must be 6 numbers).
b. Confirm: Enter Password again to confirm.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
Set up additional users
4. Select user1 then click Edit.
5. user Enable: Select Enable.
6. user name: Enter User Name (up to 8 characters).
7. Password Enable: Select Enable or Disable.
a. Password: Enter Password
(must be 6 numbers).
b. Confirm: Enter Password again to confirm.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
Page 20 For technical questions, please call 1-800-444-3353.
8. Select User that was just named
and click Permission.
a. Click in boxes to select specific permissions.
b. Click all to select all permissions.
c. Click Clear to remove all permissions.
Figure Q
log Search Check entire system log
Parameter Set all parameters
Update version, recover factory
maintain
presets, reboot and shut down
Manage Hard Drives,
Disk manage
including deleting data
Remote login Log in remotely
Rotate Control Manage Sequence
manual
Manually start and stop recording
Record
Backup recordings of
Backup
selected channels
View live images of
live
selected channels
Playback recordings of
Playback
select channels
Perform PTZ operation
PtZ Control
(PTZ camera sold separately)
Figure R
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
9. Repeat steps above for other Users.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
Item 61229