Table of Contents
Advertisement
Display Output
Display > Output
Figure u
1. Rotate time: Amount of time, in seconds, that
each Channel will display in Live View when
Start SEQ is activated from the Pop-Up Menu.
2. VGa Resolution: Select resolution.
3. init. DEV: Select Video Output port.
Privacy Zones
Display > Privacy Zone
Allows selection of up to four areas to be
blocked from being viewed or recorded.
Figure W
1. Channel: Select Channel.
2. Privacy Zone: Toggles Privacy Zones.
3. area Setup: Select up to 4 areas to block.
Page 22
Volume
For technical questions, please call 1-800-444-3353.
4. transparency: Select Transparency of the Menus.
5. Volume: Press Volume button
to open Volume Control.
Figure V
a. Set Volume (if audio hooked up).
b. Check mute box to turn off sound.
c. Click save icon on right to save
settings, then click Ok.
d. Right click to return to Output.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
4. mask area: Select Setup, then click
and drag green square(s) to move
and resize areas to be blocked.
5. Right click anywhere to return to Privacy Zone.
Click apply then Ok to save changes!
6. Repeat steps above for other Channels.
7. Copy: Copy parameters from one
Channel to other Channels.
a. Select Channel to copy from.
b. Select Channel to copy to or select all.
c. Click Copy, then click Ok.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.
Item 61229
Hide quick links:
Advertisement
Table of Contents
