Kenmore 116.30412 Owner's Manual page 10

TO STORE ATTACHMENTS
Remove dusting brush or combination
brush_ Snap into appropriate storage loca-
tion.
Remove crevice tool from the wand by twist-
ing Lay aside.
Remove the extension wand from the hose,
Twist the wand to the left and pull from the
hose end,
Wand
Unlock
Locking
Ring
Upper
Wand
Unlock the wand by turning the wand lock-
ing ring to the UNLOCK position.
Slide the lower wand into the upper wand,
Turn the wand locking ring to the LOCK
position,
Place the crevice tool down into the com-
pressed wand. Snap into the appropriate
storage location.
Reinsert the hose fully into the opening on
the lower body from which it was removed.
Press firmly to assure connection
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose.
Property damage could result.
EXTENSION HOSE
SOME MODELS
Some models include an extra hose which
connects to the stretch hose on the vacuum
for a longer cleaning reach.
Unit Hose _/. Extension Hose
! L= l
Insert the two tabs on the end of the
extension hose into the two "J"shaped slots
on the unit hose and twist to connect.
All attachments and the telescoping wand
can be attached to the open end of the
hose.
FLOOR BRUSH AND WAND
SOME MODELS
Some models have an extra brush and wand
for cleaning bare floors, Twist one end of the
adaptor into the floor brush and the other
end into the straight wand, Connect the
straight wand to the telescopic wand and
then to the vacuum hose or extension hose.
Floor Brush ---_
,,o.,-J.
CAUTION
When using the regular hose or with
the extension hose attached, the
cleaner should be on a solid surface
on the same level or below the level
of the user's feet. DO NOT use the
hoses when the cleaner is above the
level of the user's feet,
IIIIIHII H IIIIHHHI = =
CLEANING AREA
Between i
ATTACHMENT
Furniture* Cushions* Drapes* Stairs Walls
DUSTING BRUSH <_ X X X
CREVICE TOOL _ X X X
COMBINATION BRUSH & X X X
*Always clean attachmenis beiore usim on fabrics,
10