Installing The Hardware; Tamper Proof Statement; Before You Begin - PaloAlto Networks PA-4000 Series Reference Manual

July 17, 2015 - Palo Alto Networks COMPANY CONFIDENTIAL

Chapter 2

Installing the Hardware

This chapter describes how to install the PA-4000 Series firewall. For more information, refer to the
following topics:
•
"Tamper Proof Statement" on page 9
•
"Before You Begin" in the next section
•
"Equipment Rack Installation" on page 10
•
"Connecting Cables to the Device" on page 11
•
"Connecting Power" on page 12

Tamper Proof Statement

To ensure that products purchased from Palo Alto Networks have not been tampered with
during shipping, verify the following upon receipt of each product:
•
The tracking number provided to you electronically when ordering the product matches
the tracking number that is physically labeled on the box or crate.
•
The integrity of the tamper-proof tape used to seal the box or crate has not been
compromised.
•
The warranty seals on the device itself do not show evidence of tampering.

Before You Begin

•
It is recommended that two people be available to mount the PA-4000 Series in a 19-inch rack.
•
Have a Phillips head screwdriver available.
•
Verify that the intended location has adequate air circulation and meets the temperature
requirements. Refer to "Environmental Specifications" on page 19.
•
Allow clear space at the front and back of the device.
Palo Alto Networks Installing the Hardware • 9