April 7, 2014 - Palo Alto Networks COMPANY CONFIDENTIAL
Chapter 2
Installing the Hardware
This chapter describes how to install the PA-5000 Series firewall. For more information, refer to the
following topics:
•
"Before You Begin" in the next section
•
"Equipment Rack Installation" on page 16
•
"Connecting Cables to the Device" on page 17
•
"Connecting Power" on page 19
Before You Begin
•
It is recommended that two people be available to mount the PA-5000 Series in a 19-inch rack.
•
Have a Phillips head screwdriver available.
•
Verify that the intended location has adequate air circulation and meets the temperature
requirements. Refer to "Environmental Specifications" on page 33.
•
Allow clear space on both sides of the device.
•
Unpack the device.
•
Verify that power is not connected to the device.
Palo Alto Networks
Installing the Hardware • 15