Dual Access (Black & White Only); Real Time Transmission - Brother MFC-9840CDW User Manual

Dual access
(black & white only)
Your machine supports dual access, which
lets you dial a number and begin scanning a
fax into memory while you are already
sending or receiving a fax.
The LCD will show the new job number. The
number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
• Your machine normally uses dual access.
• If you get an Out of Memory message
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memory message while
scanning a subsequent page, you can
press Mono Start to send the pages
scanned so far, or press Stop/Exit to
cancel the operation.

Real time transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Sending in real time for all faxes
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 5.
22.Setup Send
5.Real Time TX
a
On
b
Off
Select ab or OK
c
Press a or b to choose On.
Press OK.
Sending in real time for the next fax
only
5
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 5.
22.Setup Send
5.Real Time TX
a
On
b
Off
Select ab or OK
c
Press a or b to choose Next Fax:On.
Press OK.
Note
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Not sending in real time for the next
fax only
a
Make sure you are in Fax mode
5
b
Press Menu, 2, 2, 5.
22.Setup Send
5.Real Time TX
a
On
b
Off
Select ab or OK
c
Press a or b to choose Next Fax:Off.
Press OK.
Note
• If the memory is full or you are sending a
colour fax, the machine will send the
5
document in real time (even if
.
Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Sending a fax
5
.
5
5
.
41