Bt Call Sign (U.k. Only) - Brother MFC-9840CDW User Manual

Note
You can program a Tel/R key press as
part of a number stored in a One-Touch or
Speed-Dial location. When programming
the One-Touch or Speed-Dial number
(Menu, 2, 3, 1 or 2, 3, 2) press Tel/R first
(the screen displays "!") then enter the
telephone number. If you do this, you do
not need to press Tel/R each time before
you dial using a One-Touch or Speed-Dial
location. (Storing one-touch dial
numbers on page 59 or Storing speed-
dial numbers on page 60.) However, if
PBX is not chosen in the Telephone Line
Type setting, you cannot use the One-
Touch or Speed-Dial number the Tel/R
press is programmed into.
Telephone and external devices

BT call sign (U.K. only)

The BT Call Sign subscriber service is a way
to have a separate number for your machine,
it allows you to have at least two separate
telephone numbers on one telephone line.
Each telephone number has its own
distinctive ringing pattern.
You can set up your machine so that it only
responds to the second number.
When you set the BT Call Sign feature to ON,
the receive mode is set to Manual
automatically. Manual mode will not respond
to incoming telephone calls, since the
number you use for telephone calls will use
the normal ring pattern. If you turn the feature
off, your receive mode will remain on
Manual.
To enable the machine to work with BT
Call Sign
This feature will only work with your external
telephone.
a
Press Menu, 2, 0, 2. The screen
displays the current setting.
20.Miscellaneous
2.BT Call Sign
a
Off
b
Set
Select ab or OK
b
Press a or b to choose Set (or Off).
Press OK.
c
Press Stop/Exit.
7
7
7
51