Store A Pause In A Memory Number; Dial A Number In One-Touch Memory; Dial A Number In Two-Touch Memory; Erase A Memory Number - AT&T 915 User Manual

915_CIB_2ATT 6/9/03
◗◗◗
w
12
2:01 PM Page 12
Store a Pause in a Memory
Number
Press and release r once to
store a 3.6 second pause in the dialing
sequence, twice for a 7.2 second pause
and so on.
w
NOTE: Each 3.6 second pause counts
as one digit when storing numbers in
telephone memory.
Dial a Number in
One-Touch Memory
To dial a number stored in memory
locations
1 Lift the handset and wait for a
dial tone.
2 Press the memory button ( ,
is stored. The number is dialed
automatically.
Dial a Number in
Two-Touch Memory
To dial a number stored in a two-touch
memory location (0 - 9):
1 Lift the handset and wait for a
dial tone.
2 Press and release e, then press
the memory button (0 - 9)
where the number is stored.
The number is dialed automatically.

Erase a Memory Number

To erase a number stored in memory,
store a new number in its place.
, or :
or ) where the number