AT&T 922 User Manual

Two-line speakerphone

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

User's Manual for the

Two-Line Speakerphone 922

Fold open this manual for information about

this telephone's installation and operation.

Please read Part 1 — Important Product

Information, included in this package.

• Try calling the number you want

to enter into memory. When the

call is ended, press

and a memory button.

• If someone lifts an extension

phone while you are storing num-

bers in memory, programming

might be interrupted. Make sure

all extensions are on hook while

storing numbers in memory.

• You might not hear the confirma-

tion beep if the RECEIVER

(handset) volume is set too low, or

if you are in a noisy location.

• If the number is more than 24

digits long, make sure you follow

the directions for "Dialing Long

Numbers."

• Do not put the phone on Hold

while storing numbers.

Printed in Mexico. 848235974 Issue 1AT&T

IN CASE OF DIFFICULT Y

Problems With Line Status Lights

• Make sure all plugs are connected

properly. Inspect the line cord

connections at the modular jack

and at the telephone. Also inspect

the coiled handset cord connections

at both ends.

• Try replacing old bat t e ries. See

" B at t e ri e s " in the Installation section.

• Make sure the batteries are cor-

rectly installed, and that the bat-

tery contact surfaces and battery

case are clean.

• If only one telephone line is con-

nected, make sure that only the

batteries for that line (as labeled

on the battery compartment) are

installed.

Part 2

Telephone Does Not Ring

• Make sure the RINGER switch

is set in the LO or HI position.

• If there are several other

telephones on the same line, try

disconnecting some of the other

telephones. Having too many

telephones connected can also

create problems such as low ringer

volume, or impaired sound quality

during calls.

Need help?

Do you have a question about the 922 and is the answer not in the manual?

Questions and answers

Summary of Contents for AT&T 922

Page 1 User’s Manual for the Two-Line Speakerphone 922 Fold open this manual for information about this telephone’s installation and operation. Please read Part 1 — Important Product Information, included in this package. Part 2 © 1998 Philips Consumer Communications, L.P. All rights reserved. Printed in Mexico.
Page 2 I N S TA L L AT I O N NOTE: This telephone requires a Before using the telephone, you If you have wall-mounted the 2-line modular jack or two separate should install AA batteries (not telephone, follow these directions: one-line modular jacks to use this included).
Page 3 I N S TA L L AT I O N c o n t i n u e d Table 7 Confirm Lines 1 and 2. 5 Connect the line cord(s) to Press and call one of your modular wall jack(s) and mount 1 Remove the base.
Page 4 TELEPHONE OPERAT I O N Making a Call—Handset N OT E : If the Line Status lights are To release Hold, press the appropri- not working properly, try installing ate line button, then lift the handset Press and then lift new batteries.
Page 5 TELEPHONE OPERAT I O N c o n t i n u e d Conference Call Options signals for access to telephone Press and release (the red banking or long-distance services. Mute light goes on) to talk privately To place a conference call on Hold: with someone else in the room with- EXAMPLE: 1.
Page 6 M E M O RY Memory Features hear two beeps to confi rm that the 3 P ress and a memory bu t t o n . number has been stored corre c t ly. Capacity: This telephone can store Storing Numbers Just Dialed 6 Hang up or press after the...