Redial; Flash - AT&T 915 User Manual

915_CIB_2ATT 6/9/03
w w
w
2:01 PM Page 9

Redial

The last number dialed at this phone is
stored in redial memory. To place a
redial call, lift the handset and listen for
the dial tone, then press r.
The number is dialed automatically.
NOTE: Redial memory can store up
to 32 digits. If the last number dialed
was longer than 32 digits, redial
memory is disabled.
Erase Redial
You can erase the redial memory for
privacy. Lift the handset. Press p
then, press r and hang up.
— OR —
Lift the handset. Press any key, then
hang up.
NOTE: If the phone is set for dial
pulse service, you cannot press t
or # to erase redial memory.

Flash

Press to access phone company
F
subscriber services as described by your
telephone service provider.
9