Store A Pause In A Memory Number; Dial A Number In One-Touch Memory; Dial A Number In Two-Touch Memory; Erase A Memory Number - AT&T 915 User Manual

12
Store a pause in a memory
number
Press and release REDIAL/PAUSE once
to store a three to four second pause in
the dialing sequence. Each additional press
will add another three to four second pause.
NOTE: Each three to four second pause
counts as one digit when storing
numbers in telephone memory.
Dial a number in
one-touch memory
To dial a number stored in memory
locations ,
Lift the handset and wait for a
1.
dial tone.
Press the memory button (
2.
or
stored. The number is dialed
automatically.
Dial a number in
two-touch memory
To dial a number stored in a two-touch
memory location ( 0 - 9 ):
Lift the handset and wait for a
1.
dial tone.
Press and release MEM, then press
2.
the memory button ( 0 - 9 ) where
the number is stored. The number
is dialed automatically.

Erase a memory number

To erase a memory location, store a
different telephone number in the same
location.
or :
) where the number is
,