Servo Selection; Before Starting Assembly; Using The Manual; Warranty Information - Hangar 9 Extra 260 Assembly Manual

Hide thumbs Also See for Extra 260:
Table of Contents

Advertisement

Servo Selection

The servos used for the control surfaces of the Extra 260 must have a minimum of 80 ounce inch of
servo torque. In the prototype Extras, we used JR8231 and JR9411 servos. On the rudder we used one
JR8411SA servo.

Before Starting Assembly

Before beginning the assembly of the Extra 260, remove each part from its bag for inspection. Closely inspect
the fuselage, wing panels, rudder, and stabilizer for damage. If you find any damaged or missing parts, contact
the place of purchase.
If you find any wrinkles in the covering, use a heat gun or covering iron to remove them. Use caution while
working around areas where the colors overlap to prevent separating the colors.

Using the Manual

This manual is divided into sections to help make assembly easier to understand and to provide breaks between
each major section. Remember to take your time and follow the directions.

Warranty Information

Horizon Hobby, Inc. guarantees this kit to be free from defects in both material and workmanship at the date
of purchase. This warranty does not cover any parts damaged by use or modification. In no case shall Horizon
Hobby's liability exceed the original cost of the purchased kit. Further, Horizon Hobby reserves the right to
change or modify this warranty without notice.
In that Horizon Hobby has no control over the final assembly or material used for the final assembly, no liability
shall be assumed nor accepted for any damage of the final user-assembled product. By the act of using the
product, the user accepts all resulting liability.
Once assembly of the model has been started, you must contact Horizon Hobby, Inc. directly regarding any
warranty question that you have. Please do not contact your local hobby shop regarding warranty issues, even if
that is where you purchased it. This will enable Horizon to better answer your questions and service you in the
event that you may need any assistance.
If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to
return this kit immediately in new and unused condition to the place of purchase.
Horizon Hobby
4105 Fieldstone Road
Champaign, Illinois 61822
(877) 504-0233
www.horizonhobby.com
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents