Download Print this page

Technical Support - Toshiba SD-M1302 Installation Instructions Manual

Dvd-roms with realmagic hollywood+ playback card

Advertisement

TECHNICAL SUPPORT

Technical support can be obtained by calling 949/455-0407 or e-mail-
ing: toshibadpd@cerplex.com. Additional technical information can be
found on our website at:
Specifications
DATA CAPACITY
(bytes/block)
ROTATIONAL
SPEED (rpm)
SUSTAINED
DATA TRANSFER 4,460 -
RATE (kbytes/sec)
ACCESS TIME
Avg. Random Access
Avg. Random Seek
Avg. Full Stroke
DATA BUFFER
POWER SUPPLY
MTBF
DIMENSIONS
WEIGHT
FCC DECLARATION OF CONFORMITY
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC
Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to
radio and TV reception. The user is cautioned that changes and modifications made to the equipment without
the approval of the manufacturer could void the user's authority to operate this equipment.
LASER CAUTION
This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model
properly, read this Owner's Manual carefully and keep this manual for future reference. In case of any trouble with
this model, please contact your nearest "Authorized Repair Center". To prevent direct exposure to the laser beam,
do not try to open the enclosure
http://www.toshiba.com/taecdpd/
SD-M1302
DVD
Mode
2,048
2,048
DVD:
4,600
(3.3-8X)
DVD-R:
1,100-
2,800
(2X)
Mode
10,800
2,595- 2,959-
6,000
(typ)
95ms
85ms
210ms
256kbytes
5.75" X 1.6" X 7.6" (146mmx41.5mmx193mm)
1.92lbs/0.87kg
CD
Mode
1
2
2,336
CD: 8,500
DVD:
single layer:
(17.2-40X)
CD-RW: 4,300 6,900
dual layer:
(8.6-20X)
Audio/Video:
6,300
1,200 - 2,000 DVD-R:
2,800
(4-5.7X)
Mode
1
2
6,843
80ms
75ms
145ms
+5v, +12V
100,000 hours
SD-M1402
DVD
Mode
2,048
1
2,048
CD/CDR: 8,500
(17.2-40X)
CD-RW: 4,300
(5-12X)
(8.6-20X)
Audio/Video:
(4.1-10X)
1,200 - 2,000
(2X)
(4-5.7X)
Mode
6,750 -
1
16,200
2,595- 2,959-
6,000
95ms
80ms
170ms
140ms
128kbytes
2.09lbs/0.95kg
460014-D0
P/N 460014-D0
CD
Mode
2
2,336
Mode
2
6,843
80ms
75ms

Advertisement

loading

This manual is also suitable for:

Sd-m1402