Refreshment Unit Operation; Lockdown Mechanism; Module Removal And Installation - Cushman refresher fs4 Owner's Manual

OPERATING PROCEDURES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

REFRESHMENT UNIT OPERATION

B

Lockdown Mechanism

1. Countertop: The passenger side countertop is removable for module replacement. To remove, lift countertop up
and remove from hinge support. Removing the countertop allows the modules to slide out after releasing the module
clamps (see next section for module clamp operation).
2. Module Clamps: The Refresher unit modules are secured by module clamp that place a downward force on the
modules. Release the clamp by turning the rotating mechanisms on both sides of unit toward the left. Raise the
clamp high enough so that a module can be lifted up and out of unit. The clamp must be released on BOTH sides of
module before it can be removed from unit.
Module Clamp Release Mechanism

Module Removal and Installation

The standard FS4 unit features:
• One (1) 6" pull out module
• One (1) 18" cup and display module
• One (1) 18" display module with shelves
Units may be equipped with optional modules of various sizes and designs not specifically described in this manual. The
basic removal and installation process for all modules is similar.
The countertop and all modules must be properly installed before operating the vehicle.
26
Lift up passenger
side countertop
and remove.
Owner's Guide
Countertop
Clamp raises to release module.