Cushman refresher fs4 Owner's Manual page 36

OPERATING PROCEDURES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
side countertop and release module clamps (refer to lock down mechanism). Gently pull the module up and out
B
using the door handle and or top end of module.
Make sure hanger board is inside the
module with the door closed before
removing module.
Passenger side countertop must be removed and module clamp released before attempting module removal.
Removal of 18" modules may require a second person to assist with support and lifting.
3. 18" Modules: 18" modules are positioned in
place with four dimples on the bottom sur-
face. Remove passenger side countertop and
release module clamps. Apply a slight
upward force, along with a pulling force to
nudge dimples free and slide module out.
Ensure that it is adequately secured before
completely removing from unit.
28
Owner's Guide
6" pull out module
housing
Positioning dimples
located on bottom
Model may vary in
appearance
Positioning dimples
located on bottom
of module