Removable Shelves And Inserts - Cushman refresher fs4 Owner's Manual

OPERATING PROCEDURES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

Removable Shelves and Inserts

B
1. Rear End Cap (above Trash Compartment)
a. Bottom Insert: This insert has two functional sides; one side for beverage canisters and miscellaneous acces-
sories, opposite side for various bottles/accessories. The insert can be pulled up and out of its position. Rotate
to its opposite side and place back into position.
Bottom insert can be lifted up
and flipped over for different
bottle storage options
2. 12" and 18" Modules (unit may not be equipped with all modules)
a. 12" and 18" Module with Shelves: The shelves can be adjusted for custom compartment spacing or can be
removed completely. 12" or 18" modules are equipped with two shelves.
b. 18" Cup and Display Module: This 18" module is equipped with two adjustable/removable shelves, one cup
tray with four slots and one beverage box.
30
Removable Trays
Shelving
Owner's Guide
To remove shelf:
1. Push/pull up
2. Push down slightly to release shelf