IBM Netfinity 3500 M20 Installation Manual page 39

Option problems
An IBM option that was just
installed does not work.
Expansion enclosure
problems
The SCSI expansion
enclosure used to work, but
does not work now.
Verify that:
1. The option is designed for the server. Refer to the "Support for
Netfinity Servers" flowchart for information about obtaining
ServerProven™ compatibility information from the World Wide Web.
2. You followed the installation instructions that came with the option.
3. The option is installed correctly.
4. You have not loosened any other installed options or cables.
5. You updated the configuration information in the Configuration/Setup
Utility program. Whenever memory or an option is changed, you must
update the configuration.
If the problem remains, call for service.
Verify that:
1. The cables for all external SCSI options are connected correctly.
2. The last option in each SCSI chain, or the end of the SCSI cable, is
terminated correctly.
3. Any external SCSI option is turned on. You must turn on an external
SCSI option before turning on the server.
For more information, see your SCSI and expansion enclosure
documentation.
Suggested action
Suggested action
Chapter 5. Solving problems
Solving problems
27