Sharp LC-37XD1E Service Manual page 28

LC-37XD1E/RU
10. Initialization to factory settings
Caution: When the factory settings have been made, all user setting data, including the channel settings, are
initialized. (The adjustments done in the adjustment process mode are not initialized.) Keep this in
mind when initializing these settings.
Adjustment item
1 Factory settings
After adjustments, exit the adjustment process mode.
To exit the adjustment process mode, turn off the MAIN power key.
When the power is turned off with the remoto control, unpulug the AC power cord and plug it back in.
Adjustment conditions
ends by turning off the
MAIN POWER key.
(See to below caution)
Adjustment procedure
[Factory setting with adjustment process mode]
Enter the adjustment process mode.
Move the cursor to [Factory Init] on page 2/13.
Use the R/C key to select a region from
[EURO/UK/ITALY/FRANCE/RUSSIA]and press the [OK] key.
"EXECUTING" display appears .
After a while, "[Destination] OK" display appears, the setting is
completed.
[Factory setting with R/C key]
Enter the adjustment process mode.
Push a remote controller code of each destination. (See below )
It automatically becomes in the process adjustment menu (INIT)
and change FACTORY INIT becomes "EXECUTING" display.
After a while, "OK" display appears, the setting is completed.
destination R/C code
42XD1K A8(Hex)
42XD1I E8(Hex)
42XD1F E9(Hex)
42XD1R EB(Hex)
42XD1E FE(Hex)
The following items are initialized in the factory setting.
1. User settings
2. Channel data (e.g. broadcast frequencies)
3. Maker option setting
4. Password data
3 – 13