Dimplex WRCPF-KIT Owner's Manual page 8

Wall Control Installation
ler to be removed from the
Outer Housing (Figure 5).
3. Open the Battery Compart-
ment as shown in Figure 6 and
remove the Insulating Strip as
shown in Figure 7.
4. Replace the battery compart-
ment cover.
Figure 5
Figure 6
8
Outer
Housing
Controller
Battery
Compartment
5. Reinsert the Controller back
into the Outer Housing by
realigning the tracks on the top
and bottom of the unit with
the guides inside the Outer
Housing. Push the Controller
in until you hear the push-
lock latches click (Figure 8).
6. Slide the Controller and Outer
Housing assembly into a stan-
dard device box and fasten
with the two (2) flat head
screws (supplied) as shown in
Figure 9.
7. Attach your choice of Decora
style faceplate (not supplied)
to complete the installation
and to blend the installation in
with your choice of decor.
Figure 7
Insulating
Strip
www.dimplex.com