Dimplex Midline Remote User Manual

Midline Remote with Purifire™
User's Guide
Operation
B
I
K
D
M
O
F
Q
H
A. Room J. Temperature Up
Temperature
K. Dimmer Down
B. Set
L. Dimmer Up
Temperature
M. Flame Speed
C. Dimmer
Down
D. Flame Speed
N. Flame Speed Up
Control
O. Sleep Timer
E. Sleep Timer
Down
F. Purifire™
P. Sleep Timer Up
G. Purifire™ On/
Q. Purifire™ Speed
Off
Down
H. Flame & Heat
R. Purifire™ Speed
On/Off
Up
I. Temperature
Down
B. Set Temperature
Press H. Flame & Heat On/Off
button to turn fireplace on. Press J.
Temperature Up to raise thermostat,
or I. Temperature Down to lower the
thermostat. Press both J. Temperature
Up and I. Temperature Down to
change °F to °C.
C. Dimmer
While the fireplace is running,
repeatedly press the L. Dimmer Up or
K. Dimmer Down button to increase or
decrease the brightness of the upper
lights.
D. Flame Speed Control
While the fireplace is running, press the
N. Flame Speed Up button to increase
the speed of the flame or press the M.
Flame Speed Down to decrease the
speed of the flame.
E. Sleep Timer
A
The Sleep Timer automatically shuts off
the fireplace after a preset time (from
30 minutes to 8 hours).
J
During fireplace operation, to set the
C
L
sleep timer press the P. Sleep Timer
Up button. Set the timer from 30
N
E minutes through 8 hours. The fireplace
P
will automatically turn off when the
sleep timer reaches zero (0) minutes.
R
The sleep timer can be cancelled at any
time by pressing the O. Sleep Timer
Down button repeatedly until the sleep
G
timer displays nothing.
F. Purifire™
Press the G. Purifire™ On/Off button
to turn the Purifire™ function on. When
the Purifire™ function is on the
Purifire™ symbol will flash. When off,
the symbol will be solid. The default
setting for the Purifire™ is set at low
speed. Press the
Down or the R. Purifire™ Speed Up
buttons to change between low and
high speeds.
Press the G. Purifire™ On/Off button
to turn the Purifire™ function off.
H. Flame & Heat On/Off Button
Press the H. Flame & Heat On/Off
button to turn the Flame/Heat function
on. When B. Set Temperature is
higher then A. Room Temperature the
heat will come on. To turn the heat off,
lower the B. Set Temperature so that
it's setting is lower then the A. Room
Temperature. The default temperature
setting is 72°F (22°C).
!
NOTE: When using the
remote control the heater
runs on a thermostat. Press
the J. Temperature Up or I.
Temperature Down buttons to
adjust the set temperature. Once
the desired set temperature is
reached the heater will turn off.
The heater will cycle on and
off to maintain the desired set
temperature.
Q. Purifire™ Speed
Child Lock (Figure 1)
1. Depress tab on the battery cover on
the back of the remote transmitter
and remove the battery cover.
2. Move Child Lock tab to the right to
lock the remote transmitter.
Child Lock tab back to the
3. Move
left to unlock the remote transmitter.
4. Replace the battery cover.
!
NOTE: To temporarily unlock the
remote transmitter press (in order)
I. Temperature Down then J.
Temperature Up then K. Dimmer
Down.
When the remote transmitter's backlight
is illuminated the Child Lock is
bypassed. When the backlight is off the
Child Lock is re-activated.
Figure 1
Unlocked
Child Lock Tab
Locked
7211970100R00