Jigs And Tapes For Service - Hitachi VM-H675LA Service Manual

JIGS AND TAPES FOR SERVICE

1. Alignment Tape
20HSC-2: No. 7099231
5. Special Driver
No. 7099239
9. DSP AV Output Jig
No. 7099456
12. AVOutput Cable (*3)
[Accessory]
15. 4-Pin Extension Cable
No.7069203
Caution for jigs
*1 . Always set SW3 on the ATF-R jig to ON.
*2 . The ATF jig (No.7099386) can also be used in place of ATF-R jig to adjust this model.
*3 . Either the monaural or stereo AV output cable can be used.
1 - 4
2. Cassette Torque Meter
SRK-8T-132: No. 7099235
SRK-8T-112: No. 7099385
6. C12 Light Balance
Filter
No. 7099369
10. Presonal Computer
[Goods on the market]
13. Adjustment Floppy Disk [New Jig]
3.5 inch: No. TP12115
5 inch: No. TP12116
16. ODC DC CORD
No. TE13171
3. Master Plane
No.7099237
7. ATF-R Jig (*1,*2)
No. 7099461
11. Personal Computer Cable
RS-232C (9-pin or 25-pin)
Straight Type Cable
[Goods on the market]
17. 80-Pin Extention Board
No. JP25461
4. Reel Disk Height Jig
No. 7099238
8. DSP-R jig
No. 7099448
14. 8 - 20 Pin Extention
Cable
No. TS15411