Identifying Controls - Hitachi VM-H675LA Service Manual

Identifying Controls

1 2 3 4 5
7 8 9 10
1. Built-in DC Light (p56) (for VM-
H675LA/VM-E575LA)
2. Lens Door (p28)
The lens door will open automatically when the
camcorder is set to the camera (CAM) mode.
3. Power Zoom Control (p31)
4. Cassette Eject Switch (p22)
5. Shoulder Strap Slot (p16)
6. Charge Indicator (p17)
7. Record Indicator (p28)
8. Infrared Receiver (p14)
9. Microphone
10. CAM/OFF/VIDEO Power Switch
(p28)
CAM: Set to this position to record.
VIDEO: Set to this position to play back a tape.
11. Diopter Control (p16)
To adjust the viewfinder eyepiece to suit your eye-
sight.
12. Electronic Viewfinder (p16)
13. DC Light Switch (p56)
(for VM-H675LA/VM-E575LA)
To switch the DC light between ON, OFF and
AUTO.
E10
6 11 12 13
14 15 16 17
14. Hand Strap (p16)
15. Cassette Holder (p22)
Insert cassette here.
16. Microphone Jack
(for VM-H675LA)
Connect external microphone (not supplied) here.
17. Audio/Video Output Jacks
(Behind the jac k cover) (p50)
Connect the provided AV cable from this jack to
the AV input jack of your TV or VCR. The jacks on
camcorder differ for each model as follows:
VM-H675LA has S-VIDEO jack and monaural
audio output jack.
VM-E575LA/VM-E573LA has monaural audio
output jack.
VM-H675LA VM-E575LA/
VM-E573LA
18
27
18. LCD Brightness Controls (p14)
19. 2.5-inch LCD Monitor (p14)
20. Speaker (p32)
21. Power Supply Attachment
Section (p17)
22. Cloc k Battery Compartment
(p13)
23. Sub Power Switch
STANDBY: Pressing the Start/Stop button will
start recording.
LOCK: The camcorder will not enter the
record mode even if the Start/Stop
button is pressed.
24. Start/Stop Button (p28, 33)
This works as a recording start/stop button in the
CAM mode and as a playback pause button in the
VIDEO mode.
25. BATT . EJECT Lever (p18)
Sliding, and then holding, this switch, remove the
battery from the camcorder.
26. Shoulder Strap Slot (p16)
27. LCD Monitor OPEN Button (p14)
To open the LCD monitor.
HITACHI VM-H675LA/VM-E575LA/VM-E573LA
19 20 21 22 23 24 25 26
28 29 30 31 32 33 34
28. DATE Button (p26)
To set the date or display it.
29. TITLE Button (p46)
To select or create a title, or display one.
30. EFFECT Button (p37)
To record digitally processed image or play back
picture with digital effect added.
31. FOCUS/VOL Control Buttons
(p32, 36)
CAM mode: To switch between auto focus and
manual focus, or to control focus
while in manual focus mode.
VIDEO mode: To control playback volume.
32. BLC (Backlight Compensation)
Button (p43)
When recording a subject in bright light, hold this
button down to compensate for lighting on tape.
33. MENU Button (p23)
To display the menu.
34. DC IN Jack (p21)
Use this jack to power the camcorder from the AC
adapter or from battery in your vehicle.
E11