Removing Of Major Parts - Sharp PG-M25X Service Manual

1. Removing the top panel
1-1. Detach the terminal block cover.
1-2. Remove the five lock screws from the top panel.
1-3. Press the right side of the bottom body to undo the hook.
1-4. Press the left side of the bottom body to undo the hook.
1-5. Press the front of the bottom body to undo the hook. Get the top panel loose from the bottom body.
1-6. Slightly raise the front of the top panel and disconnect the speaker connector.
2. Removing the PC I/F PWB and cooling fan
2-1. Disconnect the connector.
2-2. Remove the three lock screws from the PC I/F PWB and then the two hex support screws.
2-3. Disconnect the connector and take out the cooling fan.
1-6
1-4
1-5
1-2

REMOVING OF MAJOR PARTS

Top panel
1-2
1-2
1-2
1-3
1-1
1-2
Terminal block cover
2-2
13
PG-M25X
2-1
PC I/F PWB unit
2-3
2-3
Cooling fan
2-2