Removing Of Major Parts; Notes - Sharp XV-ZW99U Service Manual

xv-m99u
I
REMOVING OF MAJOR PARTS
1. Removing the Lamp cage unit and Intake cover
l-l. Remove the intake cover.
l-2. Remove the screws and detach the lamp cage cover.
l-3. Remove the three screws off the lamp cage unit.
l-4. Pull out the lamp cage unit.
Notes:
l
Before the replacement, turn off the projector's power button, make sure the cooling fan comes to a complete
stop, and unplug the power cord.
l
The lamp may be still very hot. Turn off the power button, unplug the power cord and wait for at least 1 hour
before staring the job.
l
In fitting the lamp cage unit back into position, make sure the connector is at the top position.
Cage Unit
Intake Cover
12