Pnp/Pci Configurations - Syntax SV266A User Manual

↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ → → → → ← ← ← ← : Move
ESC: Exit F1:General Help F5:Previous Values
F7:Optimized Defaults
This screen enables you to set IRQs that will resume the system from a power
saving mode.
Set any IRQ to Enabled to allow activity at the IRQ to wake up the system
from a power saving mode.
Press <Esc> to return to the Power Management Setup screen.

PNP/PCI Configurations

This section describes configuring the PCI bus system. PCI (Peripheral Com-
ponent Interconnect) is a system, which allows I/O devices to operate at
speeds nearing CPU's when they communicate with own special compo-
nents.
All the options describes in this section are important and technical and it is
strongly recommended that only experienced users should make any
changes to the default settings.
Phoenix - AwardBIOS CMOS Setup Utility
Enter : Select +/-/PU/PD:Value:
PnP/PCI Configurations
44
F10: Save
F6:Fail-Safe Defaults