Syntax SV266A User Manual page 57

USB 2.0 Support
OnChip IDE Device
OnChip PCI Device
Super I/O Device
Init Display First
OnChip USB Controller
USB keyboard Support
IDE HDD Block Mode
PWRON After PWR-Fail
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ → → → → ← ← ← ← : Move Enter : Select
F1:General Help
F7:Optimized Defaults
USB 2.0 Support (Enabled)
Select enabled if your system support the USB 2.0 function.
OnChip IDE Device
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ → → → → ← ← ← ← : Move Enter : Select
F1:General Help
F7:Optimized Defaults
On-Chip IDE Channel 0/1 (Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated
on the mainboard.
IDE Prefetch Mode (Enabled)
The onboard IDE drive interfaces supports IDE prefetching, for faster drive ac-
cess. If you install a primary and secondary add-in IDE interface, set this field
to Disabled if the interface does not support prefetching.
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four
items let you assign which kind of PIO (Programmed Input/Output) is used by
IDE devices. Choose Auto to let the system auto detect which PIO mode is
best, or select a PIO mode from 0-4.
[Enabled]
[Press Enter]
Menu Level
[Press Enter]
[Press Enter]
[PCI Slot]
[All Enabled]
[Disabled]
[Enabled]
[Off]
+/-/PU/PD:Value: F10: Save ESC: Exit
F5:Previous Values F6:Fail-Safe Defaults
OnChip IDE Device
[Enabled]
[Enabled]
Menu Level
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
+/-/PU/PD:Value: F10: Save ESC: Exit
F5:Previous Values F6:Fail-Safe Defaults
37
Item Help
Item Help